Testing Machine

Laser particle size analyses offers a powerful technology for particle size distribution analysis of powders, control every batch magnet property in the best condition.

Test magnetic flux through triaxial coil: Φx(magnetic declination), Φy(magnetic moment), Φz(magnetic flux), then caculate three directions's magnetic moment: MX/ MY/ MZ, total product's moment is M.

To test the rough magnet property after sintering process, measuring range of BJ is ±1.999T, H access range is ±3999KA/M, (BH)max range is 1-80MGOe, also capable of the variable temperature testing function from nomal temp to 200℃

Oven can do aging test with different magnet grades, temperature can be from nomal to 400℃.

Salt Spray Machine is to verify the coating corrosion resistance, take the neutral salt spray test, can spray intermittently or continiously, also can practise as customized requirements like 36hours, 72hours, 96hours etc.

Digital Projector is to measure the goods size precisely. Different from manual operation, digital projector can automatically position the lens then through CCD sensitization change to digital signal, refer to the grade criteria to judge imaging quality.

Confirm the coating thickness based on the corrossion degree by electrolyte, at present can test Zinc, Copper, Ni-Cu-Ni

Measure kinds of bearings run-out tolerance. This instrument is very easy to practise with high efficiency.

Multi-position choice of the measurement range, applied scope 0-160mwb.

To test the finished magnet surface gauss, measurement range is 0-2000mT

To measure the metal hardness. Use impact part to knock the sample surface, measure the knock speed and rebound speed specific value at 1mm away sample surface of impact part. HL=1000×VB/VA

Precision measuring instrument The coordinate measuring machine has guiding mechanism, length measuring component and digital display device in three mutually perpendicular directions. There is a worktable (large and large) which can place the workpiece. The measuring head can be manually or manually. A measuring device that moves lightly to the measured point and displays the coordinate value of the measured point by the reading device and the digital display device. Obviously this is the simplest and most primitive measuring machine. With this measuring machine, the coordinates of any point in the measuring volume can be displayed by the reading device and the digital display device. The measuring point of the measuring machine is a measuring head, which is equipped with a grating scale and a reading head in the direction of the three axes of X, Y and Z. The measurement process is that when the probe contacts the workpiece and sends a signal of the mining point, the control system collects the coordinate v