-Nd-Fe Alloy Magnet
 
 
 
 
 
  -Injection ferrite
 
 
 
 
 
 
 
New Products



 
 
 
 
 
 
 
 
 
 



 
 
 

 
>>HOME >> Technical Alerts >> Magnet Coatings

 

Samarium Cobalt, Alnico, and Ceramic materials are corrosion resistant, and do not require to be coated against corrosion. Alnico is easily plated for cosmetic qualities, and Ceramics may be coated to seal the surface, which will otherwise be covered by a thin film of ferrite powder (although not a problem for most applications).

Neodymium Iron Boron magnets are susceptible to corrosion and consideration should be given to the operating environment to determine if coating is necessary. Nickel or tin plating may be used for Neodymium Iron Boron magnets, however, the material must be properly prepared and the plating process properly controlled for successful plating. Plating houses experienced in the plating of NdFeB materials are difficult to locate, and must be furnished with the necessary information for proper preparation and control of the process. Aluminum chromate or cadmium chromate vacuum deposition has been successfully tested, with coating thickness as low as 0.0005". Teflon and other organic coatings are relatively inexpensive and have also been successfully tested. A further option for critical applications is to apply two types of protective coatings or to encase the magnet in a stainless steel or other housing to reduce the chances of corrosion.





Ndfeb Magnet   |  Alnico Magnet   |  Smco Magnet  |  Ferrie Magnet   |  Magnet Powder   | Magnetic Assembly
Copyright © Newland International Trade Co., Ltd. All Rights Reserved. Design By HiSupplier Online Inc.
Browse Keywords By Alphabet:   A B C D E F G H I J K L M N O P Q I S T U V W X Y Z 0-9